Contact Us

Becker Orthopedic

635 Executive Drive
Troy, MI 48083
United States

Phone:

(800) 521-2192
(248) 588-7480

Fax:
(800) 923-2537

 

Do you have a technical question?
Please click here and fill out the Technical Support
form to submit your question.
 

Hand Punch Tool

 

Product Description

The Tamarack Hand Punch quickly and easily produces precisely located holes for installing Tamarack Flexure Joint hardware. The configuration of the "nose" guides the punch to the correct location for a perfectly positioned hole. The Hand Punch may also be used for general hole punching needs. It is available in Large, Medium and Pediatric sizes to match the three Tamarack Flexure Joint sizes.

 

Model T-740-2 Order Chart

Order No.

Description

T-740-2L

Large Hand Punch

T-740-2M

Medium Hand Punch

T-740-2P

Pediatric Hand Punch

 

Spanner Wrench Tool

 

Product Description

The Spanner Wrench Tool has a spring loaded retractable center pin, which helps hold and align the flange nut for easier installation of the dorsiflexion assist joints. The spanner pins match up with four notches in the flange nut. This also makes for easier removal of the joints in the presence of a cured thread locking compound on either 740 or 742 style joints.

 

Model T-740-3 Order Chart

Order No.

Description

T-740-3LM

Large/Medium Spanner Wrench

T-740-3P

Pediatric Spanner Wrench

 

Hex Tools

 

Product Description

Hex tools are used for installing Tamarack Flexure Joints. Hex keys and drivers may be purchased by ordering the model numbers listed below.

Model T-740-4/5 Order Chart

Order No.

Description

Diameter

T-740-4LM

Large/Medium Hex Driver

2.5mm

T-740-4P

Pediatric Hex Driver

2.0mm

T-740-5LM

Large/Medium Hex Key

2.5mm

T-740-5P

Pediatric Hex Key

2.0mm

 

Copyright 2014 by Becker Orthopedic